|
|
Build Your Online Product Catalogs?
| Product Name: |
Sell cast iron square box Dachang
|
| Supply Ability: |
1000 |
| Related proudcts |
csat iron tools, mesauring tools, square box, |
| Specifications |
100-500mm |
| Price Term: |
T/T |
| Port of loading: |
TIANJIN |
| Minimum Order |
1 |
| Unit Price: |
|
|
A. Description of square box ,Verification
Cast iron square box :High strength HT200-300
Cast iron square box structure, is a cavity cube with 6 working surface wich are made of cast iron or steel, one of the working face has a v-slot. (Also can be produced to T-slot. According to the user's required to process order). Square box test of the environmental conditions: normal temperature and humidity. The working surface of cast iron square box may not have rust, scratches, cracks, dents and other defects affecting measurement performance. Non-working surface should be processed with clean sand painting and edge chamfering.
Accuracy of square boxes: except for the scraping test plane givers, but also with the coloring used to test the contact pattern. In any number of spots within a square of the side length of 25mm: 1grade, 2grade no less than 25 points; 3grade not less than 20 points.
Square box test of the environmental conditions: normal temperature and humidity. The working surface of square box may not have rust, scratches, cracks, dents and other defects affecting measurement performance. Non-working surface should be processed with clean sand painting and edge chamfering. There should be signs in the interior wall side, and marked with standard size, level serial number and manufacturer name.
B. Using of square box
Square box function: Cast iron square box is mainly used for the testing and marking of the parallel and vertical degree of each part. Square box is a kind of cavity cube with 6 working surface wich are made of cast iron or steel, one of the working face has a v-slot.
C . Method of square box
Square box test method: For the square box, which side length of 315mm and below this size, put 1mm gage block at each side of the tested surface of square box, and put knife block lip ruler on the working surface, then test the plug with gage block at each tested point. The difference between the size of gage block group which is just pluged and both side of the gage block is regarded |
| Company: |
Botou City Dachang Machinery Equipment Manufacture Co.,Ltd
|
| Contact: |
Ms. ada ada |
| Address: |
NO99 Xihuan Road |
| Postcode: |
062150 |
| Tel: |
86-317-8266656 |
| Fax: |
86-317-8330333 |
| E-mail: |
|
|
|
|
Home
